Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Roswell
Gate installation in Roswell typically runs $3,200-$8,500 for a complete residential system, with most homeowners receiving a written quote within 48 hours of our free site visit. We dispatch crews to Roswell daily from our Atlanta office, and we know the local subdivision layouts well enough to bring the right hardware on the first trip. If you’re dealing with an aging estate gate off Woodstock Road or an HOA community entrance along GA-9, we’ll tell you straight whether your existing frame can be retrofitted or if replacement is the smarter spend. Call (706) 928-9815 to schedule a free measure and written estimate.
Why Vance Gate Repair Roswell Is Roswell’s Preferred Gate Installation Company
We’ve been working on gates in Roswell long enough to recognize the patterns. The brick-front subdivisions built between the late 1980s and mid-2000s, neighborhoods like Horseshoe Bend and the communities threading along Alpharetta Highway, share a common problem: their ornate wrought iron and aluminum swing gates were installed with hardware that is now 20 to 30 years old. Our Gate Installation team doesn’t guess at what we’ll find. We bring diagnostic tools, a camera, and the expectation that we’ll document everything we touch.
Our technicians are background-checked and uniformed, and we send a name and photo before arrival. Under The Haven Standard, every job starts with a written scope and price, and ends with a photographed record of what was found, what was set, and what was installed. That documentation habit came from Adrian Vance’s commercial access-control work starting in 2014, and we apply it to every residential driveway gate in Roswell the same way.
A live person answers our phones 24 hours a day. No voicemail loop, no callback queue. If your gate is stuck open after an ice storm or your HOA is citing a safety violation, someone who can dispatch help will pick up.
We also offer a free second opinion on any written estimate from another company. Bring the paperwork and we’ll review it at no cost. Our 365-Day Done Right Promise covers all completed work: if it’s not right, we make it right with no argument and no fee within that window.
Our Gate Installation Services in Roswell
Driveway Gate Installation
Most new driveway gates in Roswell are installed on properties where an older gate still hangs but the operator and safety systems have failed. We measure the opening, assess the post footings for red clay heave, and specify either a swing or slide configuration based on your grade and setback. A typical driveway gate installation in Roswell, including operator, safety edges, and two remote transmitters, runs $4,800-$8,500 for a standard residential opening up to 16 feet. We use commercial-grade hardware even on residential jobs because the ornamentation and weight of Roswell’s ironwork demands it.
Swing Gate Installation
Swing gates dominate Roswell’s older subdivisions, but they’re also the most vulnerable to the cyclic swelling and contraction of north Georgia’s red clay soil. We see posts that have shifted two to three inches out of plumb, throwing the gate frame into binding contact with the ground or the jamb. Our swing gate installations include poured concrete footings below the frost line, adjustable hinge hardware, and a rack-and-pinion or articulated arm operator sized to the actual gate weight, not the catalog guess. If your existing frame is sound, we can often reuse it. If the posts have heaved beyond recovery, we’ll say so and quote the rebuild honestly.
Double Gate Installation
Double swing gates are common on the larger lots in east Roswell and the estate properties near the Chattahoochee River corridor. These systems require synchronized operators and careful attention to the center meeting point, which shifts as the posts move. We install master-slave operator pairs with electronic synchronization, and we always add safety photocells at the center pinch point. A double gate installation in Roswell typically runs $6,200-$9,800 depending on width, material, and whether the existing posts can be salvaged.
Sliding Gate Installation
Sliding gates make sense when the driveway slopes sharply toward the street or when setback limits prevent a swing gate’s arc. We install cantilever and tracked systems, with a preference for cantilever on Roswell’s wooded lots where leaf debris and pine straw would foul a ground track. The operator is mounted off the ground, clear of runoff and frost heave. A sliding gate installation with a mid-range operator runs $5,500-$7,900 in Roswell.
Pedestrian Gate Installation
Pedestrian gates are often the forgotten element of a Roswell property’s perimeter, but they’re the piece that gets daily use. We install matching walk-through gates with self-closing hinges, magnetic latches, and optional keypad or card reader access tied to the main driveway system. These typically run $1,800-$3,400 depending on material and access-control integration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Roswell
We carry parts and complete systems for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Roswell specifically, we stock LiftMaster and FAAC operators and control boards because those are the brands that best handle the heavy ornamental gates common in this market. We also maintain a supply of legacy Linear components for diagnostic purposes, though we no longer install new Linear systems since the manufacturer has discontinued many of the control boards that Roswell’s 1990s installations depend on. Having the right parts on the truck means we don’t leave your gate open overnight waiting for a warehouse shipment.
Common Gate Installation Problems We See in Roswell Homes
- Discontinued control boards on 1990s Linear and early LiftMaster operators. These systems were installed across Roswell in a tight window during the subdivision boom. When the board fails, replacement parts are no longer manufactured. We diagnose this in the first ten minutes and convert the quote to a full operator replacement with modern UL 325 safety compliance rather than chasing obsolete inventory.
- Hinge post heave in expansive red clay soil. Roswell’s soil profile swells in wet winters and contracts in dry summers, progressively tilting posts out of plumb. A gate that dragged last summer may not close at all after the next freeze-thaw cycle. We rebuild footings with proper drainage and adjustable hinge hardware that can accommodate future movement.
- Ice storm damage to legacy gate arms and mounting hardware. Roswell sits in the zone that receives Atlanta’s periodic severe ice storms. The accumulated weight shears aluminum gate arms, cracks operator housings, and strips lag bolts from wooden posts. Systems installed before modern safety cycling requirements were never built to withstand this loading, and we see total failures that require both structural and operator replacement.
- Legacy safety gaps on pre-2010 installations. Many of Roswell’s estate and community gates lack photocells, safety edges, or entrapment protection zones that are now standard under UL 325. We upgrade these systems during installation rather than grandfathering in non-compliant hardware, which matters for HOA inspections and liability coverage.
Pricing for Gate Installation in Roswell, GA
We’re transparent about numbers because The Haven Standard demands it. Here is what gate installation costs in Roswell’s current market:
| Service | Typical Range in Roswell |
|---|---|
| Pedestrian gate (materials + install) | $1,800 - $3,400 |
| Single swing driveway gate with operator | $4,800 - $7,200 |
| Double swing driveway gate with operators | $6,200 - $9,800 |
| Sliding driveway gate with operator | $5,500 - $7,900 |
| Post and footing rebuild (per post) | $800 - $1,400 |
| Operator replacement only (existing gate) | $2,400 - $4,600 |
| Safety system upgrade (photocells, edges, loop) | $600 - $1,200 |
Three factors move these ranges: the condition of the existing posts and footings, the weight and wind load of the gate material, and whether we’re integrating with an existing access-control system or installing new. Every quote is written and handed to you before any work starts. No exceptions. Call (706) 928-9815 for a free estimate at your Roswell property.
We Also Serve Cities Near Roswell
Our crews work daily across the north Atlanta metro. If you’re in Alpharetta, Marietta, Holly Springs, or Kennesaw and need Gate Installation in Roswell or your own local service, we dispatch from the same Atlanta office with the same equipment and the same Haven Standard documentation. The gate density and age profile differ by city, and we adjust our truck stock accordingly.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Roswell
No. Linear and early LiftMaster control boards from the 1990s and early 2000s are no longer manufactured, and we don’t install used or refurbished safety components. We replace the entire operator with a current-production unit that meets UL 325 entrapment protection standards. The new operator mounts to your existing gate frame if the frame and posts are sound. Call (706) 928-9815 and we’ll inspect the system to confirm whether the frame can be reused.
The hinge posts are likely heaving in Roswell’s expansive red clay soil, which shifts cyclically with moisture changes. Adjusting the hinges compensates temporarily, but the post itself continues to move. We rebuild the footing with proper drainage and install adjustable hinge hardware that can be reset without re-pouring concrete. In some cases, especially on wooded lots near the Chattahoochee River corridor, we also recommend switching to a cantilever slide gate that doesn’t depend on post plumb. Call (706) 928-9815 for a free evaluation.
All new and replacement gate installations in Roswell must comply with UL 325, which requires entrapment protection: photocells (infrared beams that stop the gate if crossed), safety edges on leading and trailing edges, and a monitored external entrapment device. We also install audible and visual warning devices and a manual release mechanism accessible from both sides of the gate. Your HOA may have additional requirements; we review the covenants before quoting so the installation passes inspection the first time. Call (706) 928-9815 to discuss your specific HOA’s rules.
Often yes, if the track, rollers, and frame are sound. We see many slide gates in Roswell’s commercial and light industrial properties where the gate itself is fine but the operator has failed. We remove the old motor, inspect the rack for wear, and install a new operator with modern soft-start/soft-stop programming that reduces impact loading on the aging frame. If the rollers are flat-spotted or the track is bent from ice storm debris, we’ll include that in the written quote. Call (706) 928-9815 for an exact assessment.
Replace. A cracked operator housing compromises the internal gear train and motor alignment, and temporary sealing never holds through another freeze-thaw cycle. More importantly, a housing crack usually indicates that the operator was undersized or outdated for the gate’s wind load and ice accumulation. We install a properly sized replacement with adequate safety margin for Roswell’s ice storm exposure. Under Clause 1 of The Haven Standard, you’ll get the written price before we start. Call (706) 928-9815 for a free estimate.
Ready to get a written quote for your Roswell gate installation? Call (706) 928-9815 today. We’ll schedule a free site visit, measure your opening, assess your existing posts and hardware, and leave you with a documented price and scope before any work begins. That’s The Haven Standard, and it’s how we’ve handled 22,000+ gates since 2014.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Roswell and the north Atlanta metro since 2014.