FAAC Gate Parts & Welding Nationwide

FAAC Gate Parts & Welding in Roswell: What to Know First

We provide independent FAAC gate parts & welding service in Roswell, with most hinge replacements, rail repairs, and post welds completed in a single visit. A written price is handed to you before any work starts, and every job leaves behind a photographed record of what was found and what was fixed. If your FAAC 400, 422, or S800 series operator is working fine but the gate itself is sagging, binding, or catching, this page is for you. Call (706) 928-9815 for a free estimate.

Call (706) 928-9815

How FAAC Products Fail - and How We Fix Them

• FAAC 422 swing-gate arms stress the hinge pin. The 422’s articulated arm pushes outward with significant lateral force, and in Roswell’s clay-heavy soil, gate posts settle unevenly. That combination wallows out the top hinge pin until the gate drops and the operator strains. We pull the pin, bore the bracket true, weld in a hardened bushing, and reset the post if it’s leaning.
• FAAC 400 underground operators crack weld-on pivot brackets. The 400 series hides the motor below grade, which means all torque transfers through a single welded pivot. After ten to fifteen years in Roswell’s wet winters and dry summers, the bracket fatigues at the weld. We cut the old bracket, grind to clean metal, and weld a new FAAC-spec or equivalent-grade replacement, then reseal the foundation box.
• FAAC S800 sliding-gate rollers flat-spot on Canton Street’s long driveways. The S800 is built for high-cycle commercial use, but on residential properties with a hundred-foot run, the V-groove rollers develop flat spots from deceleration at the same point every cycle. We replace with sealed-bearing steel rollers, not the original nylon, and weld new roller brackets if the mounting points have elongated.
• FAAC 746 articulated-arm gates sag at the receiver post. The 746’s compact arm geometry pulls the free end of the gate downward as it closes, which loosens the receiver-side hinge and eventually cracks the catch plate. We weld a reinforced catch with a gusseted bracket, then shim the hinge to restore plumb.
• FAAC photocell mounts rust through at the weld. The standard FAAC XP 20 D photocell comes on a stamped-steel bracket that traps moisture. In Roswell’s humid summers, the bracket rots before the optic fails. We fabricate a replacement from aluminum or stainless, weld it solid, and aim the beam to factory spec.

Our FAAC Gate Parts & Welding Process

1. 1
   Phone triage. We ask for your FAAC model number, symptoms, and photos if you can send them. Adrian Vance keeps a logbook on every system we’ve touched in Roswell, so if you’re a returning customer, we already know what was replaced and what’s original.
2. 2
   On-site diagnosis. The technician names what was found, names what it costs, names what you get. No guessing. We check the operator settings, the gate geometry, and the structural points before quoting.
3. 3
   Parts decision. For FAAC-specific components like the 400-series pivot bracket or 422 hinge assembly, we use OEM when it’s available and cost-justified. For structural welding and universal hardware, we use quality aftermarket that meets or exceeds the original spec.
4. 4
   Repair and weld. We grind to clean metal before welding, never paint over rust. Post replacement includes concrete footing inspection. Hinge replacement includes operator re-alignment.
5. 5
   Test and document. We cycle the gate twenty times, check limit-switch readings, and photograph every weld, every part number, every adjustment. You get the photo log before we leave. Under Haven Standard Clause 4, this evidence is filed at no additional charge.
6. 6
   Written guarantee. The 365-Day Done Right Promise covers all work. If the weld cracks or the hinge loosens, we make it right with no argument and no fee.

Before

After

What FAAC Gate Parts & Welding Costs in Roswell

The price we write is the price you pay. No surprise invoice, no “while we were here” add-ons. Call (706) 928-9815 for a free estimate.

Why Roswell Homeowners Call Vance Gate Repair Roswell for FAAC Work

We’ve repaired and documented over 22,000 gates since 2014, and a significant share of those in Roswell have been FAAC systems on estate properties near the Canton Street corridor, where original operators outlive their gates by a decade or more. We’re an independent FAAC service provider, not a factory-authorized dealer, which means we repair what’s actually broken rather than steering you toward a full replacement. Our technicians carry parts for nine major brands - including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing - so if your FAAC operator is sound but your gate needs work, we don’t need to sell you a new motor to stay busy. A live person answers (706) 928-9815 at any hour. The price is written before work starts. The record is photographed before we leave. That’s Haven Standard Clause 1 and Clause 4, every time.

FAQs