Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in Roswell, GA
Electric gate repair in Roswell typically costs between $250 and $850, depending on the specific component failure, such as a logic board malfunction, a burned-out motor, or a misaligned photo-eye sensor or gate realignment issue. At Vance Gate Repair Roswell, we provide upfront, written pricing before we touch a single bolt, ensuring you know exactly what the repair entails and what it costs. If your gate is stuck, making grinding noises, or failing to respond to your remote, call (706) 928-9815 to speak with a technician who can help you resolve the issue today.
We treat residential driveway gates with the same level of technical rigor that we applied to commercial access-control sites when Adrian Vance founded our company in 2014. Many homeowners in Roswell deal with fluctuating humidity and heat that can wreak havoc on gate electronics, causing sensors to drift or capacitors to fail prematurely. Because we operate under The Haven Standard, we do not provide verbal estimates that change once the job begins. We provide a documented scope of work and a fixed price in writing. If you need assistance with your system, our team is available to help. You can learn more about our general Gate Repair services, or visit our specific Gate Repair in Roswell page for more localized information.
When You Need Electric Gate Repair
Your gate system is an integrated machine, and when one part fails, the entire sequence often stops. We look for the root cause rather than just treating the symptom. Here are the most common signs that your electric gate requires professional repair:
- The gate stops mid-travel: This often indicates that the limit switches have drifted out of position, or the gate is encountering physical resistance on the track that the motor is interpreting as an obstruction.
- Grinding or squealing noises: If you hear metal-on-metal sounds, your bearings, hinges, or the drive gear inside the operator are likely failing. Running the gate in this condition often leads to motor burnout, which is significantly more expensive to fix.
- The gate reverses immediately after closing: This is almost always a photo-eye issue. The infrared beam is either misaligned, blocked by debris, or the sensor has suffered internal water damage from Roswell’s summer storms.
- No response from remotes or keypads: This points to a logic board or receiver issue. We check the antenna connection and the board’s voltage output to determine if the receiver is still communicating with your transmitters.
- The gate moves slowly or erratically: This usually suggests a failing start capacitor. The capacitor provides the initial jolt of energy required to move the heavy gate; when it weakens, the gate struggles to start or loses momentum halfway through the cycle.
Safety Warning: Please do not attempt to open the casing of your gate operator yourself. High-voltage capacitors can hold a lethal charge even when the power is disconnected, and the springs or counterweights on swing and slide gates are under immense tension. If you suspect a mechanical or electrical failure, keep children and pets away from the gate area and call (706) 928-9815 for a professional inspection.
Our Electric Gate Repair Process
We believe that a repair is only as good as the documentation behind it. When you invite us to your property, we follow a strict procedure to ensure the job is done correctly and that you are never left guessing about what was performed.
- Arrival and Initial Assessment: We arrive in a fully stocked service vehicle. Before we start, we inspect the entire gate system, including the hinges, the operator, and the safety devices.
- Documentation (Clause 4): Under The Haven Standard, every visit includes a documented photo record. We photograph the gate, the motor, and the specific failure point. This ensures you have a visual record of what we found and what we adjusted.
- Upfront Written Pricing (Clause 1): We write down the repair plan and the fixed price before we pick up a tool. You sign the document, and we proceed. There are no surprise invoices.
- Execution and Calibration: We perform the repair. If we are replacing a part, such as a BFT logic board or a LiftMaster gear assembly, we calibrate the settings to the manufacturer’s exact specifications, not just “close enough.”
- Verification and Handover: We test the gate through multiple cycles. We show you the final photo log and explain the adjustments we made. This record stays with you, which helps any future technician understand exactly what was done to your system.
Before
AfterElectric Gate Repair Pricing in Roswell
We provide clear, line-item pricing. Because we service nine major brands, including Mighty Mule, LiftMaster, FAAC, and BFT, we have access to the parts necessary to complete most repairs without needing to upsell you on a full system replacement.
| Service Type | Typical Cost Range |
|---|---|
| Photo-eye Alignment & Sensor Cleaning | $150 – $250 |
| Capacitor Replacement | $200 – $350 |
| Logic Board or Receiver Replacement | $350 – $700 |
| Gate Operator Gear/Drive Repair | $450 – $900 |
| Hinge Welding or Pivot Repair | $300 – $650 |
These ranges cover parts and labor. If you are wondering how much does gate repair cost in 2026, we will detail any complex solution in your written quote before any work begins. If you have a written estimate from another company, we offer a free second opinion. Bring the paperwork to us, and we will review it to ensure you are not paying for unnecessary parts or services. Call (706) 928-9815 to get your free estimate today.
FAQs - Electric Gate Repair
Can you repair my gate the same day I call?
We prioritize getting your gate operational as quickly as possible. If you need gate repair near me in Roswell, GA, our vans are stocked with common parts for major brands like LiftMaster, FAAC, and Mighty Mule, so we can complete the vast majority of repairs on our first visit. If a specific part is required that we do not have on hand, we will secure the gate for your safety and return with the exact component to finish the job.
Is it cheaper to repair my gate or replace the whole system?
In almost every case, repair is more cost-effective than replacement. We focus on fixing the specific component that has failed-whether it is a logic board, a sensor, or a drive gear-rather than recommending a new system. We only suggest replacement if the motor is obsolete, parts are no longer manufactured, or the gate structure itself is failing to the point of being a safety hazard. Call (706) 928-9815 to have us assess if your current operator can be saved.
Do you work on my brand of gate operator?
We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained to understand the specific wiring diagrams and sensitivity settings for each of these manufacturers. We do not steer you toward one brand; we work with what you already have on your property.
What does the “365-Day Done Right Promise” cover?
This promise means that if the specific repair we performed fails within one year, we will come back and make it right at no additional charge to you. This is our commitment to quality workmanship. We document every adjustment we make, so we know exactly what we did during the initial visit, allowing us to stand firmly behind our work.
Whether you are dealing with a gate that won’t open, a sensor that keeps blinking red, or a motor that is making a concerning grinding sound, we are ready to help. Our team at Vance Gate Repair Roswell is committed to clear communication, written pricing, and documented results. We are here to ensure your property remains secure and your gate operates smoothly. If you are ready to get your gate fixed, call (706) 928-9815 today for a free estimate and to schedule your service. You can also view our home page to see our full range of services.
Written by Adrian Vance, Owner at Vance Gate Repair Roswell, serving Roswell.