Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDriveway Gate in Roswell, GA
Most residential driveway gate repairs in Roswell, GA, cost between $250 and $850, depending on whether the issue is mechanical, electrical, or structural. If you need a complete gate installation, projects typically range from $3,500 to $12,000 based on materials, motor specifications, and site conditions. At Vance Gate Repair Roswell, we provide a written price before any work begins, so you know exactly what the job costs before we pick up a tool. You can reach us at (706) 928-9815 to schedule an evaluation of your specific gate system.
A functional driveway gate is more than just a barrier; it is the primary security point for your property. Whether you are dealing with a gate that refuses to close, a motor that grinds, or a safety sensor that trips for no reason, we approach the problem with the same technical discipline Adrian Vance built his career on in commercial access control. We do not just fix the symptom; we document the cause. Every visit follows The Haven Standard, which means we provide a written scope of work and a photo record of exactly what we found and what we adjusted. If you are exploring a new Gate Installation in Roswell, we can walk you through the structural requirements for your specific driveway type.
When You Need Driveway Gate Service
Driveway gates in Roswell face specific challenges, from the humidity that corrodes electrical components to the heavy clay soil that can shift gate posts over time. You should call us when you notice these specific indicators of failure:
- The gate travels past the limit switch: If your gate continues to move until it hits the physical stop, the limit switch is likely faulty or misaligned. We see this often with older LiftMaster units in Roswell where the plastic gears have worn down over years of use.
- The gate stops mid-cycle: This usually points to an obstruction in the photo-eye path or a motor that is drawing too much current. We check the infrared beam alignment first; if the beam is misaligned by even an inch, the controller treats it as an obstruction and halts the gate.
- Grinding or scraping noises: A sound like metal on metal usually suggests the gate hinges are seizing or the motor drive gear has lost teeth. We inspect the hinge integrity and the drive assembly to determine if the gate is sagging or if the motor is failing internally.
- Intermittent operation during rain: If your gate only fails during or after a heavy Roswell storm, moisture has likely compromised your control board or wiring connections. We trace these intermittent shorts and seal the enclosures to prevent recurrence under Clause 4 (Evidence on every job).
- Manual release won’t engage: If you cannot disengage the motor to open the gate manually during a power outage, the release mechanism is likely jammed or rusted. We clean and lubricate these mechanisms to ensure they operate when you actually need them.
Our Driveway Gate Process
We do not guess, and we do not provide verbal estimates that change once the work begins. Our process is designed to provide you with a clear, written record of your gate’s health, whether we are performing a minor alignment or a major repair. We serve the entire Roswell area, from the historic downtown districts to the newer developments along the Chattahoochee.
- Initial Site Assessment: We arrive at your property to inspect the entire gate system, not just the part that isn’t working. We check the gate alignment, hinge condition, and motor voltage.
- The Haven Standard Written Quote: Before we touch your gate, we present a written scope of work and a fixed price. This is Clause 1 of The Haven Standard. You see the price, you approve it, and that is what you pay.
- Evidence-Based Repair: We perform the work using professional-grade tools. If we replace a control board on a BFT or FAAC motor, we document the settings we programmed. We take photos of the wiring and the final adjustments.
- Documentation and Handover: Before we leave, we provide you with a photo log of the work completed. This ensures that if you ever need service again, the next technician-or our team-has a clear history of what was installed and how it was set.
- 365-Day Done Right Promise: We stand behind our work for a full year. If the repair we performed fails within that window, we make it right at no additional charge to you.
Before
AfterDriveway Gate Pricing in Roswell
Pricing for driveway gate work varies based on the complexity of the gate and the brand of the automation equipment; see our guide on How Much Does Gate Installation Cost? (2026 Price Guide) - Roswell, GA for detailed pricing. We believe in transparency, which is why we provide a written price before starting any job. Our pricing structure is built to cover the cost of high-quality parts and the documented, professional labor required to keep your gate running for years. If you have a written estimate from another company, we offer a free second opinion to help you understand if the proposed work is necessary or if there is a more efficient way to solve the problem.
| Service Type | Estimated Cost Range |
|---|---|
| Photo-eye Alignment & Sensor Testing | $150 – $250 |
| Hinge Repair & Gate Re-leveling | $300 – $600 |
| Gate Motor Control Board Replacement | $450 – $900 |
| Complete Gate Operator Installation | $2,200 – $5,500 |
Please note that these are estimates. Factors such as the weight of your gate, the brand of your operator (e.g., Mighty Mule, LiftMaster, or FAAC), and the condition of the existing wiring can impact the final cost. We do not use “call for pricing” tactics; we provide the exact price for your specific situation on-site after our inspection.
FAQs - Driveway Gate
How do I know if my driveway gate motor needs repair or replacement?
In most cases, we can repair the motor unless the internal transmission or the main control board is obsolete and unavailable. If your motor is a standard brand like LiftMaster or BFT, we can almost always source parts to fix it, which is usually more cost-effective than a full replacement. Call (706) 928-9815 to have us diagnose whether your motor is salvageable.
Can you fix my gate today?
We prioritize urgent gate issues because we understand that a stuck gate is a security risk for your home. We maintain a full schedule, but we work hard to accommodate same-day requests whenever our route allows. Please call us directly at (706) 928-9815 so we can check our current dispatch availability for your Roswell address.
What is the difference between a swing gate and a slide gate?
A swing gate operates like a standard door, requiring clear space to open inward or outward, while a slide gate moves horizontally along the fence line, which is better for driveways with limited depth; we also install pedestrian gates for foot traffic access. We service both types and can troubleshoot the specific hardware-hinges for swing gates or rollers and V-track for slide gates-that causes them to fail. Call us for an evaluation of your specific gate type.
Do you work on all gate brands?
Yes, we service nine major automation brands, including Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Our technician carries the specialized manuals and diagnostic equipment for these systems, ensuring we can work on whatever motor is already on your property. If you need service, call (706) 928-9815 for a free estimate.
Written by Adrian Vance, Owner at Vance Gate Repair Roswell, serving Roswell.