Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Decatur
Gate installation in Decatur typically runs $2,800-$7,500 for a complete residential system, depending on gate type, automation, and how much the existing footing needs to be reworked. Most Decatur jobs are measured and scheduled within 48 hours, with written pricing delivered before any work starts. Call (706) 928-9815 for a free measure and written estimate.
We’ve installed gates throughout Decatur’s older neighborhoods, from Oakhurst’s craftsman blocks to the tight shared driveways near Agnes Scott College. Our crews are dispatched from our Atlanta office and carry the surface-mounted hardware, helical anchors, and compact sliding-gate track systems that Decatur’s restricted sites often demand. We know the difference between a standard post dig and a tree-protected root-zone installation, and we price it correctly the first time.
Why Vance Gate Repair Roswell Is Decatur’s Preferred Gate Installation Company
Decatur homeowners find us the same way most do: they read the three-star reviews first, then call to see if we’ll put a price in writing. We do. Under The Haven Standard, every Decatur job starts with a written scope and written price before anyone picks up a tool. That habit came from Adrian Vance’s commercial access-control work starting in 2014, and it applies to every driveway gate we install in DeKalb County.
Our 22,000+ gate repairs and installations since 2014 include hundreds in Decatur proper and the surrounding intown neighborhoods. Each one left behind a documented photo record: what was found, what was installed, what settings were programmed. Decatur customers get that same documentation, plus the 365-Day Done Right Promise. If anything in our installation isn’t right, we make it right at no charge. No expiration within that window, no argument.
Response time to Decatur is typically same-day or next-day for measurements, with installation scheduled once materials are confirmed. A live person answers our phone 24 hours a day, seven days a week. No voicemail loop, no callback queue.
Our Gate Installation Services in Decatur
Driveway Gate Installation
Decatur’s residential core is packed with 1920s-1950s bungalows on narrow lots, many with shared driveways or rights-of-way that leave no margin for error. We measure the exact swing arc or slide envelope, check the slope on your concrete or clay base, and confirm whether your posts can be trenched or need surface-mounted hardware due to tree protection. A typical Decatur driveway gate installation runs $3,200-$6,800 for a complete system with operator, depending on width, material, and how much footing work the site requires.
Sliding Gate Installation
When a swing gate would block the sidewalk, a neighbor’s access, or the narrow apron between two Decatur cottages, a sliding gate is often the only workable option. We install cantilever and tracked sliding systems that run parallel to your fence line, preserving every inch of your driveway. In Winnona Park and Oakhurst, where shared driveways are common and parking space is tight, we’ve replaced failed swing gates with sliding systems that opened up usable space. Sliding gate installations in Decatur typically start around $4,500 and run to $7,500 with automation.
Double Gate Installation
Double swing gates split the opening load across two leaves and two operators, which matters on Decatur’s wider driveways between duplexes or renovated multi-family properties. We match the hinge geometry to your actual post spacing, not a standard template, and we set each post to account for clay swell. A double gate system with dual operators runs $4,200-$7,200 in most Decatur installations.
Pedestrian Gate Installation
Decatur’s walkable neighborhoods mean pedestrian gates see heavy use. We install matching walk-through gates with self-closing hinges, magnetic latches, and keypad or fob access where needed. Most pedestrian gate installations in Decatur run $1,800-$3,400, depending on whether it’s manual or automated.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Decatur
We install and service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Decatur customers, this means we can match or upgrade whatever operator is already on your property rather than forcing a brand change. We stock common LiftMaster and FAAC parts for faster turnaround on Decatur repairs, and we document every operator’s limit-switch settings and wiring configuration before we leave. Under Haven Standard Clause 4, you get the photo record and we keep the file.
Common Gate Installation Problems We See in Decatur Homes
- Root-heaved posts in red clay. Decatur’s mature oak canopy and pine understory send roots directly through post footings, while the clay swells in spring and shrinks in summer. We see gates that were plumb in April dragging by August. Our installations use deeper concrete piers, helical anchors where digging is restricted, or surface-mounted posts where tree protection applies.
- Vintage wood rot in original 1920s-1950s gates. Decatur’s housing stock includes original fence-and-gate systems with advanced rot at the rail joints and hinge mortises. We replace with pressure-treated or metal-frame gates that match the period look without repeating the failure.
- Swing gates specified where they cannot operate. A gate that swings toward the street may violate Decatur’s sidewalk clearance or block a shared driveway. We catch this in measurement and specify sliding or bi-folding alternatives before fabrication.
- Rust acceleration from humid summers. DeKalb County’s humidity corrodes wrought-iron hardware faster than drier climates. We use galvanized or stainless hinge pins and powder-coated operators rated for Georgia’s moisture.
Pricing for Gate Installation in Decatur, GA
| Service | Typical Range in Decatur |
|---|---|
| Single swing gate, manual | $2,800-$4,200 |
| Single swing gate with operator | $3,800-$5,800 |
| Double swing gate with dual operators | $4,200-$7,200 |
| Sliding gate with track/cantilever | $4,500-$7,500 |
| Pedestrian gate, manual | $1,800-$3,400 |
| Pedestrian gate with access control | $2,800-$4,500 |
| Post footing rework (tree-protected site) | $400-$1,200 additional |
These ranges reflect Decatur’s specific conditions: the frequent need for alternative anchoring on tree-protected sites, the clay-soil footing depth we use to prevent seasonal tilt, and the compact equipment access that limits us on narrow lots. Every price is written and agreed before work starts. No invoice exceeds the written quote without a change order signed by you. Call (706) 928-9815 for a free measure and exact written price.
We Also Serve Cities Near Decatur
Our Gate Installation crews work throughout the metro area, including Decatur and nearby Stone Mountain, Atlanta, Smyrna, and Lilburn. Scheduling and dispatch are coordinated from our Atlanta office; Decatur customers get local crew assignment with the same written-price guarantee.
Serving Decatur, GA - Our Local Coverage Area
We’re based in the Decatur area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Decatur
Your gate is fighting Decatur’s red clay and mature tree roots. The clay expands with spring rainfall and contracts in summer drought, tilting posts that lack adequate concrete footings. Roots from protected oaks and pines further undermine the footing. We solve this with deeper piers, helical anchors, or surface-mounted posts where digging is restricted. Call (706) 928-9815 for a free assessment.
Yes, but the footing method changes. Decatur’s municipal tree-protection ordinance restricts soil disturbance within a protected tree’s critical root zone, so we use surface-mounted posts, helical anchors, or relocated post positions rather than standard trenched footings. We verify tree protection status before quoting and design the installation to comply. The price includes this alternative anchoring.
A sliding gate is usually the right choice for narrow or shared Decatur driveways. The gate runs parallel to your fence line and needs no swing arc. We’ve installed sliding systems in Winnona Park and Oakhurst where shared rights-of-way left no room for a swing leaf. We measure your exact clearance and specify tracked or cantilever sliding hardware accordingly.
Yes. We install operators from LiftMaster, FAAC, BFT, and six other brands, matched to your gate type and existing access-control preferences. Every operator installation includes safety photocells, edge sensors where required, and keypad or remote entry programming. We document the limit-switch settings and wiring diagram before leaving.
For replacement installations, we remove the old gate only after the new posts are set and the new gate is ready to hang. On sites with a single access point, we coordinate the demolition and hang sequence to minimize downtime. In Winnona Park, we replaced a rotted 1940s wooden driveway gate between two brick cottages where a protected oak’s root zone dictated a surface-mounted post footing rather than a trenched one. We reset the hinge post, hung a new double swing gate on it, and installed a LiftMaster operator for keypad entry, keeping the narrow shared driveway open for the family’s cars the whole time. The gate no longer drags on the clay, and the safety photocell is tested and working before we left.
Written by Adrian Vance, Owner at Vance Gate Repair Roswell, serving Decatur since 2014.