Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennesaw
A new gate installation in Kennesaw typically runs $2,800-$7,500 for a residential driveway system, depending on whether it’s a single swing, double swing, or sliding configuration, and whether you’re trenching power or adding solar. Most Kennesaw installations are measured and scheduled within a week, with the written price delivered before any work starts. Call (706) 928-9815 for a free measure and written quote.
We’ve been working the Kennesaw corridor long enough to know the difference between a fresh install on new construction and the far more common job here: replacing a 1990s-era community gate that’s finally failed after decades of humid summers and red-clay soil movement. Our Gate Installation team dispatches from our Atlanta office and serves Kennesaw neighborhoods directly, carrying parts and documentation habits developed on commercial access-control sites since 2014.
Why Vance Gate Repair Roswell Is Kennesaw’s Preferred Gate Installation Company
Kennesaw’s housing stock is unusual. The explosive buildout from the late 1980s through the early 2000s left whole corridors - Barrett Parkway, Bells Ferry Road, Cobb Parkway - with dense clusters of HOA-gated subdivisions, most now twenty to thirty years old. That means our technicians see the same failing operators, the same heaved hinge posts, the same obsolete control boards, week after week. We don’t guess at what’s wrong. We name it, photograph it, and put the fix and the price in writing before anyone picks up a tool.
Our 365-Day Done Right Promise covers every installation: if it’s not right, we make it right, no argument and no fee within that window. Under Haven Standard Clause 1, the flat price is written and handed over before work begins. Under Clause 4, you get a documented photo record of every post depth, every weld, every limit-switch setting - the same wiring-diagram habit Adrian Vance developed on commercial sites starting in 2014. A live person answers our phone 24 hours a day, seven days a week. No voicemail loop, no callback queue.
We’ve completed more than 22,000 gate repairs and installations since 2014, every one with a written price first and a documented record at the end. If another company has given you a written estimate, bring it by. We’ll review it at no charge.
Our Gate Installation Services in Kennesaw
Swing Gate Installation
Swing gates remain the default for Kennesaw’s older HOA communities, especially the brick-columned entries off Barrett Parkway and along Bells Ferry. We install single and double swing systems, but we also spend a lot of time explaining when an existing swing gate should convert to slide. Red-clay soil heave tilts posts out of plumb over five to ten years, and a swing gate with bad geometry loads its gearbox unevenly until it fails. We measure the post footing depth, check for clay expansion, and tell you honestly whether a new swing install will last or whether a slide conversion is the cheaper ten-year solution.
Sliding Gate Installation
Sliding gates make sense on Kennesaw’s steeper driveways and on entries where the setback is tight. We install cantilever and tracked slide systems, spec the right motor for the gate weight and cycle count, and handle the power run or solar configuration. For communities replacing aging slide operators from the 1990s, we stock modern equivalents that fit existing gate frames without full fabrication - a real cost saver when the steel itself is still sound but the operator is end-of-life.
Security Gate Installation
Kennesaw’s planned developments were built with security gates as standard equipment, but standards have changed. A security gate installed today needs UL 325-compliant safety edges, photocells, and audible alarms. We install new community-entry security gates to current code, and we retrofit existing gates with the safety equipment required for automated operation. We also document every device placement and wire run, so the next technician isn’t tracing mystery circuits.
Pedestrian Gate Installation
Walk gates alongside vehicle entries, pool enclosures, and rear-yard access points. We match ornamental styles to existing community architecture, weld steel or aluminum frames, and install magnetic locks or keypad access where needed. In Kennesaw’s humid climate, we specify galvanized or aluminum construction for pedestrian gates unless the homeowner requests mild steel with a maintenance coating schedule.
Driveway Gate Installation
Full residential driveway systems, from post excavation to operator programming. We handle the 220V power trench, the concrete footing, the gate fabrication, and the automation. Every driveway gate installation in Kennesaw includes a written scope, a written price, and a photo log of post depths, concrete pours, and operator settings before we leave.
Double Gate Installation
Dual-leaf systems for wider Kennesaw entries, common in communities off Cobb Parkway. We synchronize the operators, set independent limit switches for each leaf, and ensure the center meeting point seals without binding. Double gates are particularly sensitive to post plumb in clay soil; we account for that in our footing depth and drainage spec.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Kennesaw
We work on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kennesaw specifically, we maintain stock of late-1990s and early-2000s LiftMaster and Elite control boards and gearboxes - the exact equipment generation installed across the Barrett Parkway corridor subdivisions. That means faster turnaround on community-entry repairs and replacements, and it means we can honestly tell an HOA board whether their existing operator is worth retrofitting or whether replacement is the cheaper call.
Common Gate Installation Problems We See in Kennesaw Homes
- Obsolete control boards on mid-1990s operators. The LiftMaster and Elite-era boards installed across Kennesaw’s HOA communities are now scarce. Board-level repair is often a temporary stall, not a fix. We evaluate whether the gearbox and mechanicals are sound enough to justify a control retrofit, or whether full operator replacement is the honest recommendation.
- Red-clay soil heave throwing posts out of plumb. Kennesaw sits in Georgia’s Piedmont belt, and the expansive clay shifts with wet-dry cycles. A post that was plumb in 1998 is often two to three inches off by 2024. That misalignment loads hinges and gearboxes unevenly until something fails. We reset footings with proper drainage or spec deeper concrete piers on new installs.
- Corroded mild-steel components from humid subtropical air. Ornamental iron gates throughout Kennesaw communities look identical, but the hinges, springs, and operator internals rust faster here than in drier markets. We specify galvanized or aluminum alternatives on replacement work, and we document corrosion patterns so the customer understands why the failure happened.
- Safety equipment gaps on pre-2000 installations. Many Kennesaw community gates were automated before modern UL 325 requirements existed. They lack photocells, safety edges, or audible warning devices. We retrofit these systems to current code or spec compliant equipment on full replacements, and we document every device for the HOA’s liability record.
Pricing for Gate Installation in Kennesaw, GA
Gate installation pricing in Kennesaw reflects local conditions: clay-soil footing requirements, the prevalence of HOA community work versus single-family residential, and the need to either match existing ornamental styles or fabricate new. Here are the ranges we see most often:
| Service | Typical Range in Kennesaw |
|---|---|
| Single swing gate (steel/aluminum, automated) | $2,800 - $4,500 |
| Double swing gate (automated, including synchronization) | $4,200 - $6,800 |
| Sliding gate (tracked or cantilever, automated) | $3,500 - $6,200 |
| Community security gate (HOA entry, full replacement) | $5,500 - $12,000+ |
| Pedestrian walk gate (fabricated, non-automated) | $1,200 - $2,400 |
| Solar opener add-on (where power trench is impractical) | $800 - $1,800 additional |
| Power trench and 220V run (per linear foot) | $18 - $28 |
What moves the number: gate material (aluminum costs more than mild steel but lasts longer in Kennesaw humidity), whether existing posts can be reused or need full replacement, and whether the job includes safety retrofit or just automation. Every price is written and agreed before work starts. No invoice surprises. Estimates are free.
We were called to a brick-columned entry off Barrett Parkway where the swing gate had been dragging for months and the board was throwing intermittent faults. The hinge post had heaved out of plumb in the red clay, and the original LiftMaster operator’s control board was obsolete - we reset the post footing, did a sag correction, and quoted a full operator replacement versus a board swap, since the gearbox was already worn. The HOA board chose replacement, and we set the new unit with working safety photocells per UL 325.
We Also Serve Cities Near Kennesaw
Our crews work Kennesaw regularly and also handle gate installation in Marietta, Holly Springs, Smyrna, and Roswell. Dispatch and scheduling are coordinated from our Atlanta office. Each city gets the same Haven Standard: written price first, documented record on every visit, and the 365-Day Done Right Promise.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennesaw
Sometimes retrofitting is honest, sometimes it’s a stall. We evaluate the gearbox condition, the availability of control boards for that specific model, and whether the mechanicals are worn past spec. For the late-1990s LiftMaster and Elite operators common in Kennesaw’s Barrett Parkway-area communities, boards are increasingly scarce and gearboxes are often already metal-on-metal. When that’s the case, we quote replacement honestly. Call (706) 928-9815 and we’ll inspect the unit at no charge.
The hinge isn’t the problem. The post is out of plumb from red-clay soil movement, and tightening the hinge just transfers that stress to the gearbox. We check post footing depth and clay drainage, then reset or replace the post before realigning the gate. Otherwise you’re paying for the same repair every two years. We document the post angle with photos so you can see the difference.
Georgia follows UL 325 standards for automated gate systems. Required safety equipment typically includes photocells (infrared beams that stop the gate if crossed), safety edges on leading edges, and audible warning devices. Many Kennesaw community gates installed before 2000 lack this equipment entirely. We retrofit to current code or spec compliant systems on new installs, and we document every device placement for the HOA record.
Yes. The density of same-generation equipment in Kennesaw communities means we maintain stock of late-1990s LiftMaster and Elite control boards, gearboxes, and limit-switch assemblies that other suppliers have discontinued. That stock is specifically for Kennesaw’s corridor subdivisions, not generic replacement parts. It shortens lead times and lets us give honest answers about whether repair or replacement makes sense.
Yes, solar openers are viable for Kennesaw residential gates with adequate sun exposure. We size the panel and battery bank to the gate weight and cycle count, and we account for winter light reduction. Most residential swing gates in Kennesaw run $800-$1,800 additional for solar configuration versus trenching power. We measure your site, check tree cover and southern exposure, and quote both options in writing. Call (706) 928-9815 for a free site evaluation.
Ready for a written price on your gate installation? Call (706) 928-9815 to schedule a free measure. We’ll photograph the site, name what we found, and hand you a flat price before any work starts. That’s Haven Standard Clause 1, and it’s how we work on every job in Kennesaw.
Written by Adrian Vance, Owner at Vance Gate Repair Roswell, serving Kennesaw since 2014.